LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 653 (Steering Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC C1606: EPS Motor >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. DTC REPRODUCTION PROCEDURE 

    SYMBOL CONSULT

    1. Turn the ignition switch OFF to ON.
    2. Select "Self Diagnostic Result" mode of "EPS".

    Is DTC "C1606" detected?

    YES

    Proceed to diagnosis procedure. Refer to Diagnosis Procedure .

    NO

    Inspection End.