Diagnosis Procedure
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM SELF-DIAGNOSIS
CONSULT
- Turn the ignition switch OFF to ON.
- Erase "Self Diagnostic Result" mode of "EPS".
- Turn the ignition switch OFF and wait for at least 10 seconds.
- Turn the ignition switch ON.
- Select "Self Diagnostic Result" mode of "EPS".
Is DTC "C1602" detected?
YES
Power steering control module is malfunctioning. Replace power steering oil pump assembly. Refer to Removal and Installation .
NO
Check pin terminal and connection of each harness connector for malfunctioning conditions.