Component Inspection

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK SEAT BELT BUCKLE SWITH RH

Turn ignition switch OFF.
Disconnect seat belt buckle switch RH harness connector.

Check continuity between seat belt buckle switch RH terminals.

Seat belt buckle switch RH		Condition	Continuity
Terminal
3	4	Seat belt buckle RH is fastened	No
		Seat belt buckle RH is not fastened	Yes
	2	Seat belt buckle RH is fastened	Yes
		Seat belt buckle RH is not fastened	No

Is the inspection result normal?

YES

Inspection End.

Replace seat belt buckle switch RH. Refer to Removal and Installation .