LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 650 (Seat Belt Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B2471: SYS Heat PROTC As >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK THE VEHICLE CONDITION WITH CONSULT DATA MONITOR 
    1. Check HEAT PROTC RH in DATA MONITOR with CONSULT.
    2. Wait until OFF appears.
    3. Perform the self-diagnosis results with CONSULT, after performing the check.
    4. Touch ERASE.
    5. Perform DTC Confirmation Procedure. Refer to DTC Logic .

    Is DTC B2471 displayed again?

    YES

    GO TO 2.

    NO

    Inspection End.

  2. CHECK INTERMITTENT INCIDENT 

    Refer to Intermittent Incident .

    Inspection End.