LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 650 (Seat Belt Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B2453: BR Stroke Sen CIRC >> Component Inspection >> Component Parts Inspection

Component Parts Inspection

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK BRAKE PEDAL STROKE SENSOR 
    1. Turn ignition switch OFF.
    2. Disconnect brake pedal stroke sensor connector.
    3. Check resistance between brake pedal stroke sensor terminal as per the following.

      Brake pedal stroke sensor

      Condition

      Resistance (kOhm)

      (Approx.)

      Terminal

      2

      1

      Brake released --> depressed

      0.2 --> 1.0

      3

      1.0 --> 0.2

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Replace brake pedal stroke sensor. Refer to Removal and Installation .

scientia non olet · About LEMON Manuals