Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK AROUND TCU
Check whether there is any factor which causes excessive temperature near TCU.
Was there any factor?
YES
Correct the cause of the excessive temperature.
NO
GO TO 2 .
- PERFORM DTC CONFIRMATION PROCEDURE AGAIN
With CONSULT
- Turn ignition switch ON.
- Erase DTC using CONSULT.
- Select "Self Diagnostic Result" mode of "TELEMATICS" using CONSULT.
- Check DTC.
Is DTC B1310 detected?
YES
Replace TCU. Refer to Removal and Installation .
NO
Inspection End.