Component Inspection (Fuel Injector)
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUEL INJECTOR
- Turn ignition switch OFF.
- Disconnect fuel injector harness connector.
- Check resistance between fuel injector terminals as follows.
Fuel injector
Condition
Resistance
Terminal
1
2
Temperature [ deg.C (deg.F)]
10 - 60 (60 - 140)
1.1 - 1.9 Ohm
Is the inspection result normal?
YES
INSPECTION END
NO
Replace malfunctioning fuel injector. Refer to Exploded View .