LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 647 (Engine Control System (DTC/Circuit Diagnosis) (16 Of 17)) >> DTC/Circuit Diagnosis >> Cooling Fan >> Component Inspection (Cooling Fan Motor) >> Cooing Fan Motor 2

Cooing Fan Motor 2

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK COOLING FAN MOTOR 2 
    1. Turn ignition switch OFF.
    2. Disconnect cooling fan control module harness connector.
    3. Supply cooling fan control module harness connector terminals with battery voltage and check operation.

      Cooling fan control module

      Operation

      Connector

      +

      -

      Terminal

      E246

      6

      7

      Cooling fan operates.

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace cooling fan motor 2. Refer to Exploded View .

scientia non olet · About LEMON Manuals