LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 646 (Engine Control System (DTC/Circuit Diagnosis) (11 Of 17)) >> DTC/Circuit Diagnosis >> DTC P0606: ECM >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch ON.
    2. Erase DTC.
    3. Perform DTC confirmation procedure for 3 times. Refer to DTC Description .

    Is the DTC P0606 displayed again?

    YES

    Replace ECM. Refer to Removal and Installation .

    NO

    INSPECTION END