Component Function Check
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
CONSULT
- Select "TELESCO SW-FR" or "TELESCO SW-RR" in "Data Monitor" mode of "AUTO DRIVE POS".
- Check telescopic switch signal under the following conditions:
Monitor item
Condition
Status
TELESCO SW-FR
Telescopic switch (forward)
Operate
ON
Release
OFF
TELESCO SW-RR
Telescopic switch (backward)
Operate
ON
Release
OFF
Is the inspection result normal?
YES
Inspection End.
NO
Perform diagnosis procedure. Refer to Diagnosis Procedure .