Component Inspection (Heated Steering Wheel Switch)
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK HEATED STEERING WHEEL SWITCH
- Turn ignition switch OFF.
- Remove the heated steering wheel switch. Refer to Removal and Installation .
- Check continuity between heated steering wheel switch terminals.
Terminal
Condition
Continuity
1
2
switch pressed
Yes
switch released
No
Is the inspection result normal?
YES
GO TO 2.
NO
Replace heated steering wheel switch.
- CHECK HEATED STEERING WHEEL SWITCH INDICATOR LAMP
Apply 12 V direct current between heated steering wheel switch terminals and check that the indicator lamp turns ON.
Terminals
Condition
Indicator lamp status
+
-
5
6
Apply 12 V direct current between terminals
ON
Is the inspection result normal?
YES
Inspection End.
NO
Replace heated steering wheel switch.