Component Inspection (Heated Steering Relay)
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK HEATED STEERING RELAY CONTINUITY
- Turn ignition switch OFF.
- Remove heated steering relay. Refer to Component Location .
- Apply 12 V direct current between heated steering relay terminals and check continuity.
Terminal
Condition
Continuity
3 - 5
12 V direct current applied between terminals 1 and 2.
Yes
No current applied.
No
Is the inspection result normal?
YES
Inspection End.
NO
Replace heated steering wheel relay.