LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 642 (Body Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC U1000: Can Comm Circuit >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. DTC CONFIRMATION 

    SYMBOL CONSULT

    1. Erase the DTC.
    2. Turn the ignition switch OFF.
    3. Select "Self Diagnostic Result" mode of "BCM", after the ignition switch has been turned ON for 2 seconds or more.
    4. Check DTC.

    Is DTC U1000 detected?

    YES

    Refer to Diagnosis Procedure .

    NO

    Inspection End.