Diagnosis Procedure
- CHECK SOUND SIGNAL CIRCUITS FOR OPEN OR SHORT TO GROUND
- Turn ignition switch OFF.
- Disconnect BOSE speaker amp. connector B109 and suspect rear door speaker connector.
- Check the continuity between BOSE speaker amp. connector B109 and suspect rear door speaker connector.
BOSE speaker amp.
Rear door speaker
Continuity
Connector
Terminal
Connector
Terminal
B109
22
D202 (LH)
1
Yes
33
2
23
D302 (RH)
1
34
2
- Check the continuity between BOSE speaker amp. connector B109 and ground.
BOSE speaker amp.
Continuity
Connector
Terminal
Ground
B109
22
-
No
33
23
34
Is the inspection result normal?
YES
GO TO 2 .
NO
Repair or replace harness or connectors.
- CHECK SOUND SIGNAL CIRCUITS FOR SHORT
Check the continuity between the terminals of BOSE speaker amp. connector B109 for the suspect rear door speaker.
BOSE speaker amp.
Rear door speaker
Continuity
Connector
Terminal
B109
22
33
LH
No
23
34
RH
Is the inspection result normal?
YES
GO TO 3 .
NO
Repair or replace harness or connectors.
- CHECK SOUND SIGNAL CIRCUIT FOR SHORT TO POWER SUPPLY
- Turn ignition switch ON.
- Check the voltage between BOSE amp. connector B109 and ground for the suspect rear door speaker.
BOSE speaker amp.
Ground
Rear door speaker
Voltage
Connector
Terminal
B109
22
-
LH
0 V
33
23
RH
34
Is the inspection result normal?
YES
Replace rear door speaker. Refer to Removal and Installation .
NO
Repair or replace harness or connectors.