Diagnosis Procedure
- CHECK SOUND SIGNAL CIRCUITS FOR OPEN OR SHORT TO GROUND
- Turn ignition switch OFF.
- Disconnect BOSE speaker amp. connector B110 and suspect front door speaker connector.
- Check the continuity between BOSE speaker amp. connector B110 and suspect front door speaker connector.
BOSE speaker amp.
Front door speaker
Continuity
Connector
Terminal
Connector
Terminal
B110
13
D3 (LH)
1
Yes
8
2
3
D103 (RH)
1
4
2
- Check the continuity between BOSE speaker amp. connector B110 and ground.
BOSE speaker amp.
Continuity
Connector
Terminal
Ground
B110
13
-
No
8
3
4
Is the inspection result normal?
YES
GO TO 2 .
NO
Repair or replace harness or connectors.
- CHECK SOUND SIGNAL CIRCUITS FOR SHORT
Check the continuity between the terminals of BOSE speaker amp. connector B110 for the suspect front door speaker.
BOSE speaker amp.
Front door speaker
Continuity
Connector
Terminal
B110
13
8
LH
No
3
4
RH
Is the inspection result normal?
YES
GO TO 3 .
NO
Repair or replace harness or connectors.
- CHECK SOUND SIGNAL CIRCUIT FOR SHORT TO POWER SUPPLY
- Turn ignition switch ON.
- Check the voltage between BOSE amp. connector B110 and ground for the suspect front door speaker.
BOSE speaker amp.
Ground
Front door speaker
Voltage
Connector
Terminal
B110
13
-
LH
0 V
8
3
RH
4
Is the inspection result normal?
YES
Replace front door speaker. Refer to Removal and Installation .
NO
Repair or replace harness or connectors.