LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Multi Av System (NAVI With BOSE) (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC U1266: TCU >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK TCU USB HARNESS 

    Visually inspect TCU USB harness.

    Is the inspection result normal?

    YES

    GO TO 2.

    NO

    Replace TCU USB harness.

  2. CHECK CONTINUITY OF TCU USB HARNESS 
    1. Turn the ignition switch OFF.
    2. Disconnect AV control unit connector M158 and TCU connector M193.
    3. Check continuity between AV control unit connector M158 and TCU connector M193.

      AV control unit

      TCU

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      M158

      82

      M193

      41

      Yes

      84

      43

      85

      44

      86

      45

      87

      46

    4. Check continuity between AV control unit connector M158 and ground.

      AV control unit

      Ground

      Continuity

      Connector

      Terminal

      M158

      82

      -

      No

      85

    Is the inspection result normal?

    YES

    Replace AV control unit. Refer to Removal and Installation .

    NO

    Repair or replace harness or connectors.