Slide Double Locking

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

A new style slide double locking type connector is used on certain systems and components, especially those related to airbag control systems.
The slide double locking type connectors help prevent incomplete locking and accidental looseness or disconnection.
The slide double locking type connectors are disconnected by pushing or pulling the slider. Refer to the figure below.

CAUTION:

Do not pull the harness or wires when disconnecting the connector.

Courtesy of NISSAN NORTH AMERICA, INC.