LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 639 (SRS Airbag Control System) >> Basic Inspection >> Inspection And Adjustment >> Special Repair Requirement >> Work Procedure When Replacing OCS Control Unit

Work Procedure When Replacing OCS Control Unit

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM ZERO POINT RESET 

    Perform zero point reset. Refer to Special Repair Requirement .

    Inspection End.

scientia non olet · About LEMON Manuals