LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 638 (Glass & Window System) >> Removal And Installation >> Windshield Glass >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove inside mirror. Refer to Removal and Installation .
  2. Remove rain sensor (if equipped). Refer to Removal and Installation .
  3. Partially remove the headlining (front edge). Refer to Removal and Installation .
  4. Remove lane camera unit (if equipped). Refer to Removal and Installation .
  5. Remove cowl top cover. Refer to Removal and Installation .
  6. Remove windshield side finisher (LH/RH).
  7. Remove windshield glass using piano wire or power cutting tool (A) and an inflatable pump bag (B).
    G04145565Courtesy of NISSAN NORTH AMERICA, INC.
    • Apply protective tape around the windshield glass to protect the painted surface from damage.
    • If the windshield glass is to be reused, mark the body and the glass with matching marks.
    WARNING: When cutting the glass from the vehicle, always wear safety glasses and heavy gloves to help prevent glass splinters from entering your eyes or cutting your hands.
    CAUTION:
    • Be careful not to scratch the glass when removing.
    • Do not set or stand glass on its edge. Small chips may develop into cracks.
    • Apply a protective tape around the windshield glass to protect the painted surface from damage.
scientia non olet · About LEMON Manuals