DTC Confirmation Procedure
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Start the engine.
- Turn the MAIN switch of ICC system ON.
- Perform "All DTC Reading" with CONSULT.
- Check if the "U0126" is detected as the current malfunction in "Self Diagnostic Result" of "LASER/RADAR".
Is "U0126" detected as the current malfunction?
YES
Refer to Diagnosis Procedure .
NO
Refer to Intermittent Incident .