DTC Confirmation Procedure
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Turn the ignition switch OFF.
- Turn the ignition switch ON.
- Slowly depress the accelerator pedal completely, and then release it.
- Repeat step 3 several times.
- Perform "All DTC Reading" with CONSULT.
- Check if the DTC "C1F01" is detected as the current malfunction on the self-diagnosis results of "ICC/ADAS".
Is "C1F01" detected as the current malfunction?
YES
Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: INSPECTION END