LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 632 (Cruise Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC C1A38: Accelerator Pedal Actuator Can 1 >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 

    If DTC "C1A38" is displayed with DTC "U1000", first diagnose the DTC "U1000".

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable. Refer to DTC Description .

    NO

    GO TO 2.

  2. REPLACE ACCELERATOR PEDAL ASSEMBLY 
    1. Turn the ignition switch OFF.
    2. Replace the accelerator pedal assembly.
    3. Turn the ignition switch ON.
    4. Erases All self-diagnosis results.
    5. Perform "All DTC Reading" again.
    6. Check if the "C1A38" is detected in self-diagnosis results of "ICC/ADAS".

    Is "C1A38" detected?

    YES

    Replace the ADAS control unit. Refer to Removal and Installation .

    NO

    INSPECTION END

scientia non olet · About LEMON Manuals