LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 632 (Cruise Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC C1A06: Operation SW >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ICC STEERING SWITCH 

    Check resistance between ICC steering switch terminals.

    Terminal

    Switch operation

    Resistance [Ohm]

    13

    16

    When pressing MAIN switch

    Approx. 1

    When pressing dynamic driver assistance switch

    Approx. 267

    When pressing CANCEL switch

    Approx. 615

    When pressing DISTANCE switch

    Approx. 1090

    When pressing SET/COAST switch

    Approx. 1805

    When pressing RESUME/ACCELERATE switch

    Approx. 2985

    When all switches are not pressed

    Approx. 5415

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Replace the ICC steering switch. Refer to Removal and Installation .