Component Inspection
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK WARNING SYSTEMS ON INDICATOR
Apply battery voltage to warning system switch terminals 5 and 3, and then check if the warning systems ON indicator illuminates.
Terminals
Condition
Warning systems ON indicator
(+)
(-)
5
3
When the battery voltage is applied
On
When the battery voltage is not applied
Off
Is the inspection result normal?
YES
INSPECTION END.
NO
Replace the warning system switch. Refer to Removal and Installation .