Diagnosis Procedure
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM THE SELF-DIAGNOSIS
- Start the engine.
- Turn the Blind Spot Warning system ON, and then wait for 30 seconds or more.
- Perform "All DTC Reading" with CONSULT.
- Check if the "U1000-01" is detected as the current malfunction in "Self Diagnostic Result" of "Side radar (Rear left)".
Is "U1000-01" detected as the current malfunction?
YES
Refer to Trouble Diagnosis Flow Chart .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: INSPECTION END