DTC Confirmation Procedure
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC PRIORITY
If DTC "U0104-82" is displayed with DTC "U1000-01", first diagnose the DTC "U1000-01".
Is applicable DTC detected?
YES
Perform diagnosis of applicable. Refer to DTC Description .
NO
GO TO 2.
- PERFORM DTC CONFIRMATION PROCEDURE
- Start the engine.
- Turn the Blind Spot Warning system ON.
- Perform "All DTC Reading" with CONSULT.
- Check if the U0104-82 is detected as the current malfunction in "Self Diagnostic Result" of "Side radar (Rear right)".
Is the DTC "U0104-82" detected?
YES
Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: INSPECTION END