Headlamp (Lo) Operation
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- The BCM detects the combination switch (lighting and turn signal switch) condition with the combination switch (lighting and turn signal switch) reading function.
- The BCM transmits the low beam request signal to the IPDM E/R and the combination meter via CAN communication according to the headlamp (LO) ON condition.
Headlamp (LO) ON condition
- Lighting switch 2ND
- Lighting switch AUTO with the push-button ignition switch ON (Only when the illumination judgment by auto light system is ON. For details, refer to System Description .)
- Lighting switch PASS
- The IPDM E/R turns the integrated headlamp low relay ON according to the low beam request signal and supplies power supply to the LED headlamp control module.
- The LED headlamp control module turns the headlamp (LO) ON according to the power supply from the IPDM E/R.