System Description: Outline
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- The high beam assist system is a system that can reduce the driver's switch operation load. The system automatically switches the headlamp to the low beam mode when a vehicle ahead or an oncoming vehicle appears, while driving the vehicle with the headlamps in high beam mode at night.
- When the high beam assist system operation permission conditions are satisfied, the high beam assist indicator lamp in the combination meter turns ON and informs that the high beam assist is in operation.
- High beam assist system is controlled by each function of BCM, lane camera unit and IPDM E/R.
Control by BCM
- Combination switch reading function
- Auto light function
- High beam assist control function
- Headlamp control function
Control by IPDM E/R
- Headlamp high relay control function
Control by Lane camera unit
- High beam assist control function