LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 630 (Exterior Lighting System) >> Removal And Installation >> Rear Combination Lamp (Body Side) >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release metal clip and pawls using a suitable tool and remove rear combination lamp (body side) bolt cover.
  2. Remove rear combination lamp (body side) bolts.
  3. Pull rear combination lamp (body side) rearward.
  4. Disconnect the harness connector from the rear combination lamp (body side) and remove rear combination lamp (body side).
scientia non olet · About LEMON Manuals