Configuration (Av Control Unit): Description

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Vehicle specification needs to be written with CONSULT because it is not written after replacing AV control unit.

Configuration has three functions as follows.

Function		Description
Read / Write Configuration	Before Replace ECU	Reads the vehicle configuration of current AV control unit. Saves the read vehicle configuration.
	After Replace ECU	Writes the vehicle configuration with saved data.
Manual Configuration		Writes the vehicle configuration with manual selection.

NOTE: Manual setting item: Items which need selection by vehicle specifications

Automatic setting item: Items which are written in automatically (Setting cannot be changed)

For some models and specifications, the automatic setting item may not be displayed.

CAUTION: When replacing AV control unit, always perform "Re/programming, Configuration" with CONSULT. If not performed, AV control unit will not operate normally.

Complete the procedure of "Read / Write Configuration" in order.
Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
Never perform "Read / Write Configuration" except for new AV control unit.
If you set incorrect "Read / Write Configuration", the AV control unit may not operate properly.