Component Inspection
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK TOUCH SENSOR LH
- Turn ignition switch OFF.
- Disconnect touch sensor LH connector.
- Check resistance between touch sensor LH terminals.
Touch sensor LH
Condition
Resistance
(Approx.)
Terminal
1
2
Touch sensor LH
Detect obstruction
380 - 420 kOhm
Other than above
0.95 - 1.05 kOhm
Is the inspection result normal?
YES
Inspection End.
NO
Replace touch sensor LH. Refer to Removal and Installation .