Component Function Check

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select AUTOMATIC BACK DOOR CONTROL MODULE using CONSULT.
Select TOUCH SEN LH in DATA MONITOR mode.
Check that the function operates normally according to the following conditions.

Monitor item	Condition		Status
TOUCH SEN LH	Touch sensor LH	Other than below	OFF
		Detect obstruction	ON

Is the inspection result normal?

YES

Touch sensor LH is OK.

Refer to Diagnosis Procedure .