Component Function Check
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select AUTOMATIC BACK DOOR CONTROL MODULE using CONSULT.
- Select TOUCH SEN RH in DATA MONITOR mode.
- Check that the function operates normally according to the following conditions.
Monitor item
Condition
Status
TOUCH SEN RH
Touch sensor RH
Other than below
OFF
Detect obstruction
ON
Is the inspection result normal?
YES
Touch sensor RH is OK.
NO
Refer to Diagnosis Procedure .