LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 628 (Door & Lock (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Hazard Function >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION 
    1. Select "INTELLIGENT KEY" of "BCM" using CONSULT.
    2. Select "FLASHER" in "ACTIVE TEST" mode.
    3. Touch "LH" or "RH" to check that it works normally.

    Is the inspection result normal?

    YES

    Hazard warning lamp circuit is OK.

    NO

    Refer to Diagnosis Procedure .