Component Function Check
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select AUTOMATIC BACK DOOR CONTROL MODULE using CONSULT.
- Select HALF LATCH SW in DATA MONITOR mode.
- Check that the function operates normally according to the following conditions.
Monitor item
Condition
Status
HALF LATCH SW
Back door
Fully closed/Open
OFF
Half latch
ON
Is the inspection result normal?
YES
Half latch switch is OK.
NO
Refer to Diagnosis Procedure .