Component Function Check

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select DOOR LOCK of BCM using CONSULT.
Select CDL LOCK SW, CDL UNLOCK SW in DATA MONITOR mode.
Check that the function operates normally according to the following conditions.

Monitor item	Condition		Status
CDL LOCK SW	Door lock and unlock switch	Lock	ON
CDL LOCK SW		Unlock	OFF
CDL UNLOCK SW		Lock	OFF
CDL UNLOCK SW		Unlock	ON

Is the inspection result normal?

YES

Door lock and unlock switch is OK.

Refer to Diagnosis Procedure .