Diagnosis Procedure (U1322-56)
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CONFIGURATION WORK OF AUTOMATIC BACK DOOR CONTROL MODULE
CONSULT
- Perform configuration work of automatic back door control module.
Refer to Work Procedure .
- Turn ignition switch ON.
- Select "Self Diagnostic Result" mode of "AUTO BACK DOOR".
- Erase DTC, and then repeat "PERFORM DTC CONFIRMATION PROCEDURE". Refer to DTC Description .
Is DTC "U1322-56" detected?
YES
Replace automatic back door control module. Refer to Removal and Installation .
NO
Inspection End.
- Perform configuration work of automatic back door control module.