LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 628 (Door & Lock (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B242B: Motion Activated Back Door Sensor >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. DTC CONFIRMATION 
    1. Erase DTC.
    2. Turn ignition switch OFF.
    3. Perform the Self Diagnostic Result of AUTOMATIC BACK DOOR CONTROL MODULE using CONSULT, after the ignition switch has been turned ON for 120 seconds or more.

    Is any DTC detected?

    YES

    Refer to Diagnosis Procedure .

    NO

    Inspection End.