LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 628 (Door & Lock (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B2427: Encoder >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

DTC

CONSULT display description

DTC detecting condition

Possible cause

B2427

SPINDLE SENSOR RH

When the automatic back door control module can not receive the pulse signal from the encoder just after starting the open/close operation.

  • Improper installation of back door assembly
  • [CALIBRATION OF AUTOMATIC BACK DOOR POSITION INFORMATION]: not complete
  • Back door mechanism
  • Automatic back door control module
  • Encoder
  • Harness or connectors