Initialization Procedure
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHOOSE METHOD
There are two initialization methods.
Which method do you use?
With door switch
GO TO 2.
With vehicle speed
GO TO 4.
- STEP A-1
Turn ignition switch from ACC to OFF position.
GO TO 3.
- STEP A-2
Driver door switch is ON (open) -> OFF (close) -> ON (open).
Inspection End.
- STEP B-1
Drive the vehicle at more than 25 km/h (16 MPH).
Inspection End.