LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 627 (Automatic Drive Positioner) >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit >> Work Procedure

Work Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. SYSTEM INITIALIZATION 

    Perform system initialization. Refer to Work Procedure .

    GO TO 2.

  2. MEMORY STORAGE 

    Perform memory storage. Refer to Work Procedure .

    GO TO 3.

  3. INTELLIGENT KEY INTERLOCK STORAGE 

    Perform Intelligent Key interlock storage. Refer to Work Procedure .

    GO TO 4.

  4. SYSTEM SETTING 

    Perform system setting. Refer to Work Procedure .

    Inspection End.