DTC Detection Logic

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If DTC B26F6 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Logic .
If DTC B26F6 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC Logic .

DTC No.	CONSULT screen terms (Trouble diagnosis content)	DTC Detection Condition
B26F6	IGN USM CONT (IPDM E/R ignition control)	Diagnosis condition	When push-button ignition switch is ON.
		Signal (terminal)	--
		Threshold	Ignition relay ON signal is not transmitted from IPDM E/R (CAN) when BCM turns ignition relay ON
		Diagnosis delay time	--