Diagnosis Procedure
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK PUSH-BUTTON IGNITION SWITCH SIGNAL (PUSH-BUTTON IGNITION SWITCH)
Check voltage between push-button ignition switch connector and ground.
Push-button ignition switch
Ground
Voltage
(Approx.)
Connector
Terminal
M17
8
--
Battery voltage
Is the inspection result normal?
YES
GO TO 2.
NO
GO TO 3.
- CHECK PUSH-BUTTON IGNITION SWITCH SIGNAL (IPDM E/R)
Check voltage between IPDM E/R connector and ground.
IPDM E/R
Ground
Voltage
(Approx.)
Connector
Terminal
E119
38
--
Battery voltage
Is the inspection result normal?
YES
Replace IPDM E/R. Refer to Removal and Installation .
NO
Repair or replace harness or connectors.
- CHECK PUSH-BUTTON IGNITION SWITCH SIGNAL CIRCUIT (PUSH-BUTTON IGNITION SWITCH)
- Disconnect push-button ignition switch connector, IPDM E/R connector E119 and BCM connector M18.
- Check continuity between BCM connector and push-button ignition switch connector.
BCM
Push-button ignition switch
Continuity
Connector
Terminal
Connector
Terminal
M18
1
M17
8
Yes
- Check continuity between BCM connector and ground.
BCM
Ground
Continuity
Connector
Terminal
M18
1
--
No
Is the inspection result normal?
YES
Replace BCM. Refer to Removal and Installation .
NO
Repair or replace harness or connectors.