DTC Detection Logic
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC B260A is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Logic .
- If DTC B260A is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC Logic .
- If DTC B260A is displayed with DTC B261A, first perform the trouble diagnosis for DTC B261A. Refer to DTC Logic .
|
DTC No. |
CONSULT screen terms (Trouble diagnosis content) |
DTC Detection Condition |
|
|
B260A |
IGNITION RELAY (Ignition Relay) |
Diagnosis condition |
Push-button ignition switch is ON. |
|
Signal (terminal) |
-- |
||
|
Threshold |
BCM detects a difference of signal for 2 seconds or more between the following information:
|
||
|
Diagnosis delay time |
2 second or more. |
||