LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 621 (Engine Control System (DTC/Circuit Diagnosis) (7 Of 17)) >> DTC/Circuit Diagnosis >> DTC P0206: Fuel Injector >> DTC Description >> Fail-Safe

DTC Description: Fail-Safe

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Fail safe mode

Vehicle behavior

Traveling control mode

Accelerator angle variation control

ECM controls the accelerator pedal depression speed to make it slower than actual speed. This causes a drop in accelerating performance and encourages the driver to repair malfunction.

NOTE: ECM does not control the accelerator pedal releasing speed.

Engine output control

ECM reduces the engine output, according to the rise in engine speed. This reduces the vehicle speed to encourage the driver to repair malfunction.

Driving at 70 km/h or more is possible.

NOTE: This value is a reference value converted from engine power to vehicle speed.

Actual power limitation value differs due to the malfunctioning part and driving condition.

Combustion control mode

Stratified charge combustion control at starting

No stratified charge combustion at starting (cold start).
scientia non olet · About LEMON Manuals