LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 620 (Fuel System) >> Removal And Installation >> EVAP Control System Pressure Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect EVAP canister purge hose from EVAP canister.
  2. Disconnect the harness connector from EVAP canister control pressure sensor.
  3. Remove EVAP canister control pressure sensor.
scientia non olet · About LEMON Manuals