LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 620 (Fuel System) >> Removal And Installation >> EVAP Canister >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the harness connector from EVAP canister control pressure sensor and the EVAP canister vent control valve.
  2. Disconnect the EVAP canister purge hose, the EVAP canister vent line, and the EVAP canister vent control valve hose.
  3. Remove the EVAP canister bolt.
  4. Remove the EVAP canister from the vehicle.
scientia non olet · About LEMON Manuals