LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 618 (Engine Control System (DTC/Circuit Diagnosis) (10 Of 17)) >> DTC/Circuit Diagnosis >> DTC P0500: VSS >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC WITH TCM 

    Check DTC with TCM. Refer to CONSULT Function .

    Is the inspection result normal?

    YES

    GO TO 2.

    NO

    Perform trouble shooting relevant to DTC indicated.

  2. CHECK DTC WITH ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) 

    Check DTC with ABS actuator and electric unit (control unit). Refer to CONSULT Function .

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    Perform trouble shooting relevant to DTC indicated.

  3. CHECK DTC WITH COMBINATION METER 

    Check DTC with combination meter. Refer to CONSULT Function (METER/M &A) .

    Is the inspection result normal?

    YES

    GO TO 4.

    NO

    Perform trouble shooting relevant to DTC indicated.

  4. CHECK OUTPUT SPEED SENSOR 

    Check output speed sensor. Refer to Diagnosis Procedure .

    Is the inspection result normal?

    YES

    GO TO 5.

    NO

    Replace or replace error-detected parts.

  5. CHECK WHEEL SENSOR 

    Check wheel sensor. Refer to Diagnosis Procedure and Diagnosis Procedure .

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace or replace error-detected parts.

scientia non olet · About LEMON Manuals