Diagnosis Procedure
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ELECTRIC IVT CONTROL ACTUATOR (BANK 1) MOTOR CONTROL CIRCUIT
- Turn ignition switch OFF.
- Disconnect electric IVT control actuator (bank 1) harness connector and electric IVT control module harness connector.
- Check the continuity between electric IVT control actuator (bank 1) harness connector and electric IVT control module harness connector.
Electric IVT control actuator (bank 1)
Electric IVT control module
Continuity
Connector
Terminal
Connector
Terminal
F112
1
F105
40
Existed
2
37
3
42
- Check harness for short to power and short to ground.
Is the inspection result normal?
YES
Replace electric IVT control actuator (bank 1). Refer to Removal and Installation .
NO
Repair or replace error-detected parts.