DTC Detection Logic

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

DTC	CONSULT screen terms (Trouble diagnosis content)	DTC detection condition
P0011	INT/V TIM CONT-B1 [Intake valve timing control performance (bank 1)]	A	Diagnosis condition	Ignition switch: ON Engine speed: 1, 200 - 3, 175 rpm Engine coolant temperature: 60 - 120 deg.C (140 - 248 deg.F) Battery voltage: 11 - 16 V
			Signal (terminal)	--
			Threshold	During the advanced control of intake valve timing control, the angle difference between actual angle and target angle is 13 degrees or more
			Diagnosis delay time	6 seconds
		B	Diagnosis condition	Ignition switch: ON Engine speed: 500 - 2, 000 rpm [when vehicle speed is less than 4 km/h (2.5 MPH)] Engine speed: 1, 200 - 2, 000 rpm [when vehicle speed is 4 km/h (2.5 MPH) or more] Engine coolant temperature: 60 - 120 deg.C (140 - 248 deg.F) Battery voltage: 11 - 16 V
			Signal (terminal)	--
			Threshold	During the advanced control of intake valve timing control, the absolute difference between valve timing control reference position and base angle is 13 degrees or more
			Diagnosis delay time	3 seconds